Lexmark 10N0016/10N0217/18L0032 Refill Instruction

Posted by Brian On May - 1 - 2012

Lexmark 10N0016/10N0217/18L0032(#82) Refill Instruction

1. Use an awl to drill a hole on the top of the cartridge (See diagram).

2. Fill the syringe with ink, insert needle into the hole and push down into the center of the cartridge.

    Slowly inject up to 10 ml. ink for 10N0016, or 8 ml. ink for 10N0217, or 13 ml. ink for #82.

    In the meanwhile, watch the printhead and stop filling once any trace of ink coming

    out is observed (If happened, draw back 1 ml. ink).

3. Set the cartridge in a little container for 5 minutes as a drip precaution.

    Clean the printhead with a paper towel.

    Make sure no dripping, the install the cartridge to make a test print.

4. Clean the syringe with water and dry for future use.

* Refill immediately once cartridge empty.