Epson S020093/S020108/S020187/S020189/T013/T019 Refill Instruction

1. Put the cartridge on the paper towels in an area where you can tolerate a spill.

2. Seal the outlet hole in the base of the cartridge with thin regular tape.

3. Fill up to 10 ml. ink for 093/87/T013 or 15 ml. ink for 108/189/T019.

    Push needle through the top label into the sponge of the correct filling hole (see diagram).

    Very SLOWLY inject ink into the sponge.

4. A little ink might come out of the top once full. In that case, stop filling right away,

    move needle up to the top of the sponge, and withdraw 1 ml. ink.

5. When finished, tap the cartridge on any hard surface several times to let ink

    fully go down to the outlet, and seal the filling hole with tape.

7. Install the cartridge and run 1-3 cleaning cycle as per printer instructions.

8. Clean the syringe with water and dry for future use.

* Refill immediately once cartridge empty.