HP 6656/8727 Refill Instruction

Posted by Brian On May - 1 - 2012

HP 6656/8727 Refill Instruction

1. Peal off the top label. You can see there are 5 holes.

2. Place the printhead on several layers of paper towels to absorb any excess ink while refilling.

3. Fill the syringe with ink and very slowly inject up to 15 ml. for 6656 or 10 ml.

    for 8727 into any hole until the black just begins to show in the white sponge.

4. Put the label back with scotch tape or leave it off.

5. Set the cartridge in little container for 5 minutes as a drip precaution.

    Clean the printhead with a paper towel. Make sure no dripping,

    then install the cartridge to make a test print.

6. Clean the syringe with water and dry for future use.

* Refill immediately once cartridge is empty.